CRI-M.2D/S1-1 is the world’s best standalone duplicator supports NVMe, AHCI and SATA protocol. It automatically detects the device and supports ultra-high speed duplication up to 9GB/min.
| Bandwidth Performance | 9 GB/min (150 MB/sec) *Actual performance is dependent on device transfer speeds |
|---|---|
| Supported Formats |
|
| Supported Capacity | Over 18TB+ |
| Supported OS | All (Windows, Mac, Linux, and other proprietary systems) |
| Operation Mode | Standalone, FPGA-based Operation |
| Language | English, Japanese |
| Copy Modes | Quick Copy (System and Files) / All Partitions / Whole Device / Percentage Copy |
|---|---|
| Compare (Verification) | Bit-by-bit data comparison from the source device to target device(s). |
| Sanitization Modes | Quick Erase, Full Erase (NIST 800-88) |
| Skip Bad Sectors | Skip the number of bad sectors during Copy/Compare/Erase. |
| Compatible Device | Directly compatible with: M.2(NGFF) B Key & B+M Key. |
|---|---|
| Compatible Signal | NVMe, AHCI, SATA |
| Devices Require Optional Cables or Adapters | MAC PCIe SSD, mSATA, CFast Card. |
| LCD Display | 2×20 Backlit Monochrome LCD Display |
|---|---|
| LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) |
| Control Panel | 4 Push Buttons (▲,▼, OK, ESC) |
| Power Requirements | 12V 5A Power Adaptor |
| Temperature | Working: 5°C ~ 45°C, Storage: -20°C ~ 85°C |
| Humidity | Working: 20% ~ 80%, Storage: 5% ~ 95% |
| Certifications | FCC, CE, RoHS, and Reach |
